Repair patch made of ZEPHIR
Material: 100% Cotton
Size: 40 cm x 12 cm
This article is STANDARD 100 by OEKO-TEX® certified.
Spread out the damaged fabric on a firm surface (ironing board). Cut out the patch on all sides, leaving at least 1 cm excess, round off edges. Place the iron-on patch on the fabric with the coated side facing downwards. In the case of cotton or linen, set the iron to level 3 and iron on for about 25 seconds with firm pressure. For delicate fabrics set the iron to the permissible maximum temperature and iron on for about 35 seconds. Place a thin cloth or ironing net on top for protection. Leave the article of clothing to cool off for a few minutes, turn inside out and iron on the wrong side for about 25–30 seconds, applying pressure. Then leave the article of clothing in place to cool off. If necessary repeat the ironing process.
Only dry-iron – without a damp cloth – without steam
60 °C normal wash, do not bleach, mild drying processes (max. 60 °C) possible, iron on level 3 or maximum temperature of 200 °C, professional dry-cleaning possible.
Please note our care instructions and that of your garment.
Our information refers to the repair patch Zephir.
Material: 100% Cotton
Size: 40 cm x 12 cm
This article isSTANDARD 100 by OEKO-TEX® certified.
Repairing textiles with iron-on patches is so much easier compared to the conventional repairing with needle and thread and, as a result, a lot more nicer. In wooly cloths you can not only mend cracks, but even make a real hole almost invisible: cut a square piece of the same cloth, slightly larger than the hole. Cut out the hole in the same square shape so that the new piece fits exactly. Then iron on the iron-on patch from the left according to the instructions for use.